Laser Cladding | Plasma Surfacing
Provide a one-stop solution for wear and corrosion resistance on metal surfaces
ABOUT US
——
ABOUT US
——
The basic elements that must be possessed in each stage of production and processing in Benxi Welding Research include planning, implementation, inspection, and disposal
These four elements are continuously looped and improved in each link
1.Documented system and system
Establish quality manuals, procedural documents, and supporting documents (procurement operation manuals, employee manuals, company management systems, processing and assembly operation specifications, quality inspection instructions, after-sales service guidelines, reimbursement systems, welfare systems, etc.) to guide employee work standards
2.Standardization of management architecture
Establish an organizational chart and implement a job responsibility system (the company is divided into: General Manager's Office, Administrative Department, Procurement Department, Sales Department, R&D Department, Quality Inspection Department, After sales Service Department, Human Resources Department, Production and Manufacturing Department, etc., each department fulfilling their respective duties)
3.Planned operation mode
Implement process monitoring plans and work instructions (procurement, warehousing, material requisition, processing and production, assembly, testing, quality inspection, durability debugging, finished product warehousing, shipment, and after-sales, with the entire process coordinated and tracked by the production department in real time). Departments involved in production and processing need to strengthen adaptation and coordination, with each department fulfilling their respective responsibilities, ensuring safe production, and ensuring product quality and production efficiency
研发部
1. The personnel and equipment configuration of the R&D department are complete, and a sound design process is established. The R&D department has established a R&D system with department heads as responsible persons, and dedicated designers are assigned to design drawings, which are reviewed and finalized by department heads;
2. According to the drawings for trial processing, the production department will make a sample and submit it to the R&D department for testing. After passing the test, it can be processed and produced. If it is not qualified, the R&D department supervisor will propose improvement suggestions, and then the sample will be made and tested. Only after passing the test can it be officially produced
生产制造部
1.The Production Department is equipped with skilled personnel and complete machinery. It follows strict safety procedures, inspection standards, and a 6S management system, with the department manager as the primary responsible person. 2.Upon receiving the drawings, production is carried out as per the process. Finished parts are inspected by quality control and only qualified ones are warehoused. Unqualified parts require handling instructions from QC. The department must strictly follow safety norms and enforce 6S standards under the manager’s supervision.
售后服务部
1.The after-sales service department is fully equipped with technical personnel, tools, and equipment. The department manager assumes primary responsibility, overseeing internal affairs and coordinating with other departments.
2.The after-sales service department is responsible for pre-delivery testing of company equipment, providing written improvement suggestions for any issues found, and also handling on-site commissioning and training for customers.
行政部
1.The Administration Department is fully staffed and equipped, with the department manager serving as the primary person responsible.
2.The Administration Department is responsible for formulating and implementing various rules and regulations, and conducting daily performance evaluations for employees.
3.It also supervises safety during the production process, ensuring employees follow the Safety Operation Manual, and proposes corrective actions for any issues found, ensuring they are implemented.
1、R&D Department
1. The personnel and equipment configuration of the R&D department are complete, and a sound design process is established. The R&D department has established a R&D system with department heads as responsible persons, and dedicated designers are assigned to design drawings, which are reviewed and finalized by department heads;
2. According to the drawings for trial processing, the production department will make a sample and submit it to the R&D department for testing. After passing the test, it can be processed and produced. If it is not qualified, the R&D department supervisor will propose improvement suggestions, and then the sample will be made and tested. Only after passing the test can it be officially produced
2、Production and Manufacturing Department
1.The Production Department is equipped with skilled personnel and complete machinery. It follows strict safety procedures, inspection standards, and a 6S management system, with the department manager as the primary responsible person. 2.Upon receiving the drawings, production is carried out as per the process. Finished parts are inspected by quality control and only qualified ones are warehoused. Unqualified parts require handling instructions from QC. The department must strictly follow safety norms and enforce 6S standards under the manager’s supervision.
3、After sales service department
1.The after-sales service department is fully equipped with technical personnel, tools, and equipment. The department manager assumes primary responsibility, overseeing internal affairs and coordinating with other departments.
2.The after-sales service department is responsible for pre-delivery testing of company equipment, providing written improvement suggestions for any issues found, and also handling on-site commissioning and training for customers.
4、Administrative Department
1.The Administration Department is fully staffed and equipped, with the department manager serving as the primary person responsible.
2.The Administration Department is responsible for formulating and implementing various rules and regulations, and conducting daily performance evaluations for employees.
3.It also supervises safety during the production process, ensuring employees follow the Safety Operation Manual, and proposes corrective actions for any issues found, ensuring they are implemented.
24-hour service hotline: +86-136-5180-4643
Email: info@bxcladding.com
Factory address: No. 1285, Zhangxiang Road, Jiading District, Shanghai, China
暂无链接
Shanghai Benxi Welding Research Intelligent Techno
