تغليف الليزر | لحام البلازما
توفير حل شامل لمقاومة التآكل والتآكل على الأسطح المعدنية
——
-
2024-12-12Causes and solutions for arc failure in plasma cladding
The problem of arc failure in plasma cladding is usually more complicated than that of ordinary arc welding, because it involves the coordinated work of the powder delivery system, plasma arc stability and gas system. The following are the specific reasons and solutions: 1. Power system problem Reason:
انظر التفاصيل -
-
2024-12-10
Why does processing high-reflective materials burn the laser?
When processing highly reflective materials (such as aluminum, copper, gold, etc.), the main reasons for laser burnout are as follows: 1. Low absorption rate leads to increased reflected energy. The surface of highly reflective materials has a low absorption rate for lasers, especially
انظر التفاصيل -
2024-12-05
Environmental protection tips for electroplating, spraying and cladding
Yes, the environmental protection requirements for electroplating, spraying and laser cladding industries are becoming more and more stringent. The specific requirements are as follows: 1. Environmental protection requirements for the electroplating industry The environmental protection requirements for the electroplating industry mainly involve the discharge of wastewater, waste gas, waste residue and other pollutants.
انظر التفاصيل -
2024-12-05
Why electroplating process will be replaced by cladding process
The pollution problems of electroplating process mainly include the following aspects: 1. Wastewater pollution Electroplating wastewater contains heavy metals (such as chromium, nickel, copper, zinc, etc.), cyanide and acidic and alkaline substances. If these pollutants are discharged directly without treatment, they will seriously pollute the water.
انظر التفاصيل -
-
2024-11-22
The difference between red laser and blue laser
The differences between blue and red lasers are mainly in the following aspects: 1. Wavelength Blue laser: The wavelength is usually in the range of 400-500 nm, with 450 nm being the most common. Red laser: The wavelength is usually in the range of 620-750 nm.
انظر التفاصيل -
2024-11-21
What types of arc welding are there?
Arc cladding is a process that uses an electric arc as a heat source to melt the filler material (wire or electrode) and deposit it on the surface of the substrate to form a coating. According to the different process characteristics and equipment forms, arc cladding is mainly divided into the following types: 1. Manual
انظر التفاصيل -
2024-11-11
What are the differences between laser cladding and spraying? Differences between laser cladding and spraying
There are obvious differences between laser coating and spraying in terms of process principles, coating melt quality, thermal effects, and applicable scenarios. The following is a comparison of the main differences between the two processes and their respective advantages:
انظر التفاصيل -
2024-10-29
Laser cladding cylinder block introduction
Laser cladding is an advanced surface remanufacturing technology that forms a dense wear-resistant layer by forming piezoelectric alloy powder under high temperature of laser and metallurgically bonding it with the surface of base metal. This technology is gradually being applied in cylinder surface treatment, especially in automobiles.
انظر التفاصيل -
2024-10-18
Introduction of plasma cladding blade
Plasma cladding blade introduction Plasma cladding blade uses plasma arc technology to strengthen the surface of the blade, making it have higher wear resistance, impact resistance and corrosion resistance. This type of blade is widely evaluated in agricultural machinery, metallurgy, mining, woodworking
انظر التفاصيل -
2024-10-18
Plasma cladding machine related introduction
Introduction to plasma cladding machine 1. Equipment Overview Plasma cladding machine is a surface treatment equipment that uses plasma arc as heat source. It is mainly used for strengthening, repairing and protecting metal surfaces. It forms high
انظر التفاصيل
سؤال
انضم بنجاح
خط خدمة على مدار 24 ساعة: +86-131-2220-0188
البريد الإلكتروني: info@bxcladding.com
عنوان المصنع: رقم 1285، طريق تشانغشيانغ، منطقة جيادينغ، شنغهاي، الصين
暂无链接
上海本希焊研智能科技有限公司
